The Vandy Vape Kylin V3 RTA is a high-performance atomizer designed for cloud-chasers. With a tube capacity of 6ml and a top-filling system, this tank allows for extended vaping sessions without needing constant refills. The leakproof top airflow system ensures that the e-liquid stays inside the tank, while the honeycomb airflow on the deck maximizes […]
Category Archives: vandy vape
Review: designed with curved 180 degree airflow – Pulse AIO.5 kit Vandy Vape
The Vandy Vape Pulse AIO.5 kit is an update to the recent Pulse AIO kit. Co-designed by vape critic Tony B, the Pulse line is available in many kits, including the original Pulse BF Squonk, Pulse 80W, Pulse X and Pulse Dual. SpecsSize: 97.5×55.6×28.2mmOutput: 5-80WBattery: 1×18650 / 21700 or 20700 (not included)User modes: VW, TC, Bypass, SmartDisplay: Screen size not specifiedResistance Limits: 0.05-3ohm Why is there such a fast update? Isn’t the original Vandy Vape Pulse AIO that old? Apparently, there is an issue with the 510 connection on top of the mod, and this update aims to fix that. A new frame has been produced with a metal section around the 510 connectors, making it stronger and hopefully less likely to break. The fire button has also been updated, with square and round button settings included in the kit. All previous accessories are compatible and this is still Boro tank friendly. Battery-wise, it’s powered by a single 18650 (adapter included), 20700 or 21700 with a maximum output of 80W. Depending on the kit version you choose, Vandy Vape offers 2 tank options. Of course, you can use other Boro-compatible tanks here. If you have the RBA version, the tank has a single coil build deck that adjusts 180° surround airflow. Also, you can even get 2 vandy vape vvc coils in the kit. Other kits you may prefer:caliburn a2sgeek bar 4000
Is Vandy Vape Pulse AIO.5 kit a “deceptive” upgrade?
The second novelty is rather odd – it’s not a new thing, but an update to a device we’re familiar with, which, by the way, used to be quite sensational. The Vandy Vape smart pod system of the famous Pulse range of devices has been modernized. There aren’t many changes – we’ll try to keep an eye on Vandy Vape Pulse AIO.5 kit. ParametersDimensions: 97.5 x 55.6 x 28.2mmBody material: plasticPower supply: 1 x 18650 / 20700 / 21700Chipset: VandychipCartridge capacity: 5.0 / 3.7mlVaporizer resistance: VVC coil, RBA POD, Boro tankPower: 5 – 80W Peakcurrent:32A However, our guests looked identical to their ancestors and were almost the same size. It’s still the same rectangular box with rounded corners and licked edges. The case is again made of plastic, but already a bit “complex” and possibly more durable and wear-resistant. The translucent plastic is again used as decoration […]
Different needs and multiple protections – GAUR-18 Box Mod
The Vandy Vape GAUR 18 Box Mod is the 18650 version of the GAUR series with high strength and lightweight PSU material. Side-pull design for easy battery installation. The board is filled with thermal glue for waterproofing, so you can easily clean your box mods. Specs:Size: 91.3mm (H) x 52.5 (W) x 27mm (D)Weight: 204g – 115g w/ Out BatteryWattage: 5W – 200WBattery: 2 x 18650’s (not included)Charging: USB Type-CWorking Current: <50AWaterproof PCBALightweight This should protect the Vandy Vape device from falling. This mod does have temperature control and all the usual security. In the event your device is accidentally soiled with jam, butter, salt water, juice, smoke or dust, you can simply remove the battery and clean your device in any way. Like the original Gaur, the battery is accessed via a slide, which is preferable to some battery-access designs. The Gaur-18 200W Box Mod is the second product in the series. This new model uses 2 x 18650 batteries. It’s a lightweight device while still being rugged on the outside. A USB Type C port is installed, but no charging rate is specified. I don’t know why anyone would prefer this over the Gaur-21 – I guess if you never use a 21700 battery the vape mod could be made smaller – hence this version? Other kits you may prefer:randm tornado 7000 Californiavape starter kit New Jersey
Preview: unexpected unicorn for Unicorn Pod kit from Vandy Vape?
Today this kit is much more serious, it appears under the name of Vandy Vape, a brand that needs no special introduction. Because it appeared, or rather has not officially appeared, it was actually spontaneous-almost after the launch of the sensational Pulse AIO, it is Vandy Vape Unicorn Pod kit. ParametersDimensions: 115 x 35 x 23mmBody material: metal + plastic + eco-leatherPower supply: built-in 1600mAhChipset: VandychipCartridge capacity: 4.0ml Vaporizerresistance: VVC coilPower: 5 – 50WVoltage range: 3.2 – 4.2VOperating mode: VWSupported resistance: 0.2 – 3.0Ω Appearance The appearance is, to put it mildly, primitive. Personally, if I don’t know the facts, I would never say that the designer of Vandy Vape was born with this. Although the appearance is not new in fact, it is defeated in a very primitive way. The size of this device is the average device does not look bulky. CartridgeRemovable cartridges also provide a pair of 510 landing drip types. It is not difficult to guess that the manufacturer hinted at different ways of tightening, so, generally speaking, vaping. By the way, for the same purpose, the kit is equipped with a rotating ring for adjusting the blowing intensity, located on the upper part of the module. TankFill the top of the vape tank. It is enough to press the corresponding button, the liquid of the vape pod cartridge will automatically open, revealing the gaze of the weighing, and it is covered with a slot-type silicone plug. Capacity By the way, the capacity is not the largest, but it is still good. The pod mod itself has a complete control panel. The activation button is located at the front, and a monochrome display with secret setting keys has been fixed on the sidewall. We would like to advise you to see:pulse aio kitslaps vape
Vandy Vape JACKAROO MINI kit – both eminent and more serious
Hi, guys. Today we recommend you the new kit from Vandy Vape, it is both eminent and more serious, but he has some history behind him – let we see JACKAROO MINI kit Vandy Vape. ParametersDimensions: 85 x 46 x 30mmWeight: unknownBody material: zinc alloy + silicone + plasticPower supply: built-in 4000mAhChipset: Vandi chipOutput power: 5 -128WVoltage range: 0.5 – 8.0V Peakcurrent: 40AWorking mode: VW, TC (NI200, SS, TI), VV, BYPASSTemperature range: 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃Supported resistance: 0.05 – 3.0Ω Not so long ago, Vandy Vape has enriched itself with a new recruit to the JACKAROO line. This mod was […]
Review: Vandy Vape JACKAROO MINI kit – the “smallest” in the line
Not long ago, Vandy Vape recruited a new member for the JACKAROO series to enrich himself. This mod is both one can and two cans, and now generally has a built-in battery – Vandy Vape JACKAROO MINI kit. ParametersDimensions: 85 x 46 x 30mmBody material: zinc alloy + silicone + plasticPower supply: built-in 4000mAhChipset: Vandy Vape chipOutput power: 5 -128WVoltage range: 0.5 – 8.0V Peakcurrent: 40AWorking mode: VW, TC (NI200, SS, TI), VV, BYPASSTemperature range: 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃Supported resistance: 0.05 – 3.0Ω We start naturally in a complete non-service, which does not even have its own name. In fact, this is a sub tank – that is, a plastic bulb detachable from a metal base with a standard 510 connector. Top filling, hinged lid, fixed with a button. The capacity is not bad, but the dimensions are far from small. It feeds on a whole stack of replaceable evaporators, but traditionally only two of them will be included in the kit, even those whose resistance is unknown. Adjust the airflow by turning the ring at the bottom of the tank-again, everything is standard. Box mod is more interesting. However, we will not discuss its appearance in particular detail-after all, it completely replicates the appearance of the previous two revisions. The ergonomic silicone body is decorated with the same resin panel. The novelty continues the tradition of the line, and has protection against moisture, dust and rough handling according to the IP67 standard. Dimensions, by the way, are far from being the most modest for this kind of vape device. Related kits you may also like:wotofo nexmini tank costgeekvape obelisk 200 kit cost
Vandy Vape Widowmaker RTA review – taste transfer perfectly, right?
I continue to shuffle reviews by segments of affiliation and today the RTA atomizer from the mastodons of the vaping industry, Vandy Vape, and again products of Widowmaker RTA. The copy came out very unusual, both inside and outside. So I propose not to linger on foreplay for a long time. ParameterCase material: stainless steel […]